 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HFM101M thru HFM107M Surface Mount Ultra Fast Recovery Rectifiers REVERSE VOLTAGE 50 TO 1000 VOLTS FORWARD CURRENT 1.0 AMPERE Features: *For Surface Mount Application *Glass Passivated Chip *Low Reverse Leakage Current *Low Forward Voltage Drop And High Current Capability *Plastic Meterial Has UL Flammability Classification 94V-0 Mechanical Data: * Case: Molded Plastic, MINI-SMA(Similar to SOD-123F) * Terminals: Solder Plated, Solderable per ML-STD-750 Medthod 2026 * Polarity: Indicated by Cathode Band * Wight: 0.040 grams MINI-SMA (SOD-123F) MINI-SMA Outline Dimension unit:mm B C A MINI-SMA Dim A B C E H J Min 1.40 3.70 2.80 1.40 Max 1.80 4.10 0.30(TYP) 3.20 0.90(TYP) 1.60 E J H H WEITRON http://www.weitron.com.tw HFM101M thru HFM107M Maximum Ratings and Electrical Characteristics Rating 25 C Ambient Temperature Unless Otherwise Specified. Single Phase Half Wave, 60Hz , Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Characteristics Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA=50 C Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous At 1.0A DC Maximum DC Reverse Current @TA=25 C At Rated DC Blocking Voltage @TA=100 C Maximum Reverse Recovery Time Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range Symbol HFM HFM HFM HFM HFM HFM HFM Unit 101M 102M 103M 104M 105M 106M 107M V RRM VRMS VDC I F(AV) 50 35 50 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 1000 560 800 700 1000 V V V A I FSM VF IR TRR CJ R JA TJ T STG 50 1.0 30 1.3 5.0 150 75 20(TYP) 42(TYP) -55 to+150 -55 to+150 1.7 A V uA ns PF C/W C C NOTES: 1.Measured at 1.0MHz applied reverse voltage of 4.0V DC. 2.Thermal Resistance Junction to Ambient. Device Marking Item HFM101M HFM102M HFM103M HFM104M Marking H1 H2 H3 H4 Item HFM105M HFM106M HFM107M Marking H5 H6 H7 WEITRON http://www.weitron.com.tw HFM101M thru HFM107M RATING AND CHARACTERISTIC CURVES 10 1-M ~H FM 10 4-M 3-M ~H FM 10 5-M AVERAGE FORWARD CURRENT,(A) 1.2 1.0 0.8 0.6 0.4 0.2 0 0 Single Phase Half Wave 60Hz Resistive Or Inductive Load INSTANTANEOUS FORWARD CURRENT,(A) HF M1 0 HF M1 0 1.0 .1 Tj=25 C Pulse Width 300us 1% Duty Cycle H FM 10 6M ~H FM 10 7M 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) .01 FIG.2-Tyical Forward Current Derating Curve .001 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 PEAK FORWARD SURGE CURRENT,(A) 30 24 FORWARD VOLT AGE,(V) FIG.1-Typical Forward Characteristics 50W NONINDUCTIVE 10W NONINDUCTIVE 18 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 12 6 (+) 25Vdc (approx.) () 1W NONINDUCTIVE OSCILLISCOPE (NOTE 1) D.U.T. () PULSE GENERATOR (NOTE 2) (+) 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.4-Maximum Non-repetitive Forward Surge Current 175 120 100 80 60 40 20 NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. trr +0.5A | | | | | | | | 0 -0.25A JUNCTION CAPACITANCE,(pF) -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm 0 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) FIG.3- Test Circuit Diagram and Reverse Recovery Time Characteristics FIG.5-Typical Junction Capacitance WEITRON http://www.weitron.com.tw |
Price & Availability of HFM107M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |